Mobile WiMAX FemtoMax¢â
/ Picocell Solutions |
|
|
|
JFW-500 Mobile WiMAX Home Femtocell
Juni Mobile WiMAX Home Femtocell, JFW-500 is based on the IEEE802.16e-2005
standard. The JFW-500 is compliant with Mobile WiMAX Certification Release 1.2.
The JFW-500 is "plug & play" similar to WiFi (IEEE802.11 b/g/n) and enables "personal wireless broadband"
with licensed RF technology.
|
| |
 |
 IEEE802.16e-2005 Standard compliant
WiMAX Forum Wave 2 compliant
Voice and data service for home & small office
xDSL/Cable modem backhaul (Optional)
Residential signal coverage 160-650ft (50 - 200 m)
Easy software upgrade via network
Easy installation by Plug & Play
System control & NMS function
Synchronization by GPS or IEEE 1588
Compatible with Juni's Provisioning (JS-100) & SON (JS-200) servers
|
|
|
| Network diagram |
 |
|
| Femtocell Specifications |
|
IEEE 802.16e-2005 OFDMA PHY and MAC Support
Frequency: 2.3, 2.5 or 3.5GHz
RF output power: 50mW (17dBm)
Residential signal coverage: 160 ~ 650ft (50 ~ 200 m)
Channel bandwidth: 5MHz, 8.75MHz, 10MHz
TDD Duplex Method
QPSK, 16QAM, 64QAM Modulation
1/8 cyclic prefix 5mSec frame
DL 27 Mbps (MIMO Matrix B, 6:4 (DL:UL) symbol ratio)
Synchronization by GPS or IEEE 1588
Network interface: Ethernet or CATV network
|
|
| Data Access |
|
IP over Ethernet, 10/100 Base-T
IPv4, IPv6, VLAN
IEEE801.1q
LED: Power, Alarm, Online
|
|
| Standards Compliance |
|
IEEE 802.16e-2005
Compliant with WiMAX Forum Wave 2
IPSEC
SIP, RTP
|
|
| Mechanical Specifications |
|
Size: 5.9 x 4.7 x 1.6 inch (150 x 120 x 40 mm)
Electrical power: 5VDC, 4A
|
|
* Full specifications are available upon request.
|
|
2009 Juni All rights reserved.